If you’re receiving the Error SU-41350-3 code on your PS4, it means that the system software update file is corrupted and cannot be used. There are a few ways that you can fix this error, which we’ll outline in this blog post. Follow the instructions below and you should be able to get your PS4 up and running again in no time.
If you’re seeing the Error SU-41350-3 on your PS4, it means that the system software update file is corrupted and cannot be used. There are a few ways to fix this error, but the most effective one is to use a USB drive to re-install the system software. Here’s how:
1. First, format a USB drive to FAT32.
2. Next, create a folder on the USB drive called “PS4”.
3. Inside the PS4 folder, create another folder called “UPDATE”.
4. Download the latest version of the PS4 system software from Sony’s website and save it to the UPDATE folder on the USB drive.
5. Connect the USB drive to your PS4, and then go to the Settings menu.
6. Select “System Software Update” and follow the prompts to install the update from the USB drive.
Once the update is installed, your PS4 should be back up and running without any issues.
Table of Contents
Introduction:
If you’re seeing the error SU-41350-3 on your PlayStation 4, it means that the system software update file is corrupted. This can happen if the update file was downloaded improperly or if the storage device containing the update file was damaged.
There are a few things you can try to fix the problem and get your PS4 up and running again. First, try re-downloading the update file from the PlayStation website. If that doesn’t work, try using a different storage device to store the update file, such as a USB flash drive. If neither of those solutions work, you’ll need to perform a factory reset of your PS4.
If you’re still seeing the SU-41350-3 error after trying all of the above, it’s likely that there’s a hardware issue with your PS4. In that case, you’ll need to contact Sony customer support for further assistance.
How to Fix “Error SU-41350-3″ on PS4?
If you see the error code SU-41350-3 on your PS4, it means that the system software update file is corrupted. To fix this, you will need to delete the update file and download it again.
Here’s how to do it:
1. Go to Settings > System Software Update.
2. Select Update using Internet, and then press X.
3. Select Download Now.
4. Press the Options button, and then select Delete.
5. Confirm the deletion by selecting Yes.
6. Once the file is deleted, select Notifications from the PS4 home screen, and then select Downloads.
7. The system software update file will now be downloaded again. Once it’s finished, install the update and your PS4 will be back to normal.
Section 2:
If you are getting the SU-41350-3 error code on your PS4, it means that the system software update file is corrupted. This can be caused by a number of things, but the most likely cause is a bad internet connection.
The first thing you should do is try restarting your PS4 and see if that fixes the issue. If not, then you should try downloading the update file again. Make sure you have a good internet connection before trying to download the file again.
If you still can’t fix the SU-41350-3 error code, then you should contact Sony customer support.
What is Error SU-41350-3?
Error SU-41350-3 is a Sony PlayStation 4 error code that indicates that the system software update file is corrupted. This error can occur when attempting to update the system software via a USB storage device, or when downloading the update file from the PlayStation Network.
How to Fix Error SU-41350-3
There are a few different ways that you can attempt to fix Error SU-41350-3.
Attempt to Update the PS4 System Software via Safe Mode
If you are receiving the error when trying to update the system software via a USB storage device, you can try to update the software in safe mode. To do this:
1. Power off the PS4 system by holding the power button for at least 7 seconds.
2. Once the system is off, press and hold the power button again. Release the button after you hear two beeps: one when you initially press the button, and another 7 seconds later.
3. Connect a controller to the PS4 system using a USB cable, and then press the PS button on the controller.
4. Select Option 5 [Update System Software].
5. If prompted, connect your USB storage device that contains the update file.
6. Follow the on-screen instructions to complete the update.
If this method does not work, or you are receiving the error when trying to update the system software via the PlayStation Network, you can try the following methods.
Download the Update File Again
If you are receiving the error when trying to update the system software via the PlayStation Network, it is possible that the download was interrupted or corrupt. To fix this, try downloading the update file again.
1. Go to the Settings menu and select [System Software Update].
2. Select [Downloads].
3. Select the update file that you want to download, and then select [Download].
4. Follow the on-screen instructions to complete the update.
Delete the Update File and Download Again
If you have already downloaded the update file, you can try deleting it and downloading it again. To do this:
1. Go to the Settings menu and select [System Software Update].
2. Select [Downloads].
3. Highlight the update file, and then press the X button on your controller.
4. Select [Delete].
5. Select [Download] to download the update file again.
6. Follow the on-screen instructions to complete the update.
Reformat the USB Storage Device
If you are trying to update the system software via a USB storage device, and you have tried the other methods without success, you can try reformatting the USB storage device. Please note that this will delete all data on the device, so be sure to back up any important data before proceeding.
1. Connect the USB storage device to your computer.
2. On your computer, open My Computer (Windows) or Finder (Mac).
3. Right-click on the USB storage device, and select Format.
4. Follow the on-screen instructions to reformat the device.
5. Copy the system software update file to the USB storage device.
6. Connect the USB storage device to your PS4 system, and then press the power button to turn on the system.
7. Press the PS button on your controller to access the XMB menu.
8. Go to Settings > System Software Update, and select [Update from USB Storage Device].
9. Follow the on-screen instructions to complete the update.
Section 3:
If you see the error code SU-41350-3 on your PS4, this means that the system software update file is corrupt. To fix this, you will need to delete the update file and download it again.
Here’s how to do it:
1. Go to the Settings menu on your PS4.
2. Select “System Software Update.”
3. Press the “Options” button on your controller.
4. Select “Delete” from the menu.
5. Confirm that you want to delete the update file.
6. Restart your PS4.
7. Go back to the Settings menu and select “System Software Update” again.
8. The system will now redownload the update file.
If you continue to see the SU-41350-3 error code, it’s possible that your PS4 is not connected to the internet correctly. Make sure that your PS4 is connected to a stable Wi-Fi network or Ethernet connection.
You can also try restarting your router or modem. If that doesn’t work, you may need to contact your internet service provider for help.
Causes of Error SU-41350-3
There are several causes of the Error SU-41350-3, which include:
-Attempting to update the system software of the PS4 while a disc is inserted into the system.
-A corrupted file or system update.
-An incomplete system update.
-Damaged or incompatible hard drive.
Each of these causes can prevent the PS4 from successfully updating, and will result in the Error SU-41350-3 message being displayed. In order to fix this error, you will need to address the underlying cause.
If you are attempting to update the system software of the PS4 while a disc is inserted into the system, you will need to remove the disc and try the update again. If the update is still unsuccessful, you may have a corrupted file or system update. In this case, you will need to delete the update file and try downloading it again.
If you have an incomplete system update, you will need to restart the update process from the beginning. Make sure that you have a stable internet connection before beginning the update. If the update is still unsuccessful, you may have a damaged or incompatible hard drive. In this case, you will need to replace the hard drive.
Section 4:
If you are seeing the SU-41350-3 error code on your PS4, it means that the system software update file is damaged and cannot be used. This can happen if the update file was corrupted during the download process or if there was a problem with the storage device that you are using to update the PS4.
There are a few things that you can try to fix this error code. First, try restarting the PS4 and trying the update again. If that does not work, try deleting the update file and redownloading it. Make sure that you download the file from a trusted source and that your internet connection is stable.
If you continue to see the SU-41350-3 error code, you will need to format the storage device that you are using to update the PS4. This will delete all of the data on the device, so make sure to back up any important files before proceeding. To format the storage device, go to Settings > System > Backup and Restore. Select the storage device that you want to format and then select Format as Extended Storage.
How to Fix Error SU-41350-3
If you see the error code SU-41350-3 on your PS4, it means that the system software update file is corrupted. To fix this, you’ll need to delete the update file and redownload it from the PlayStation Network. Here’s how:
1. Go to the Notifications menu on your PS4 and press Options.
2. Select Downloads, then press the X button.
3. Find the system software update file and delete it.
4. Go back to the Notifications menu and select Settings.
5. Select System Software Updates and press X.
6. Select Update via Internet and press X.
7. Your PS4 will now redownload the system software update file and install it.
Section 5:
If you’re encountering the SU-41350-3 error code on your PlayStation 4, it means that the system software update file is corrupted and cannot be used. There are a few things you can do to try and fix this error:
First, try downloading the system software update file again and see if that works. If not, try deleting the file and then downloading it again.
If neither of those solutions work, you can try using a different storage device to download the system software update file.
Finally, if all else fails, you can try restoring your PlayStation 4 to its factory default settings. This will erase all of your data, so be sure to back up your saved games and other important files before proceeding.
Prevention of Error SU-41350-3
The best way to prevent the SU-41350-3 error is to keep your PS4 system software up to date. You can do this by going to the Settings menu and selecting System Software Update.
If you are already experiencing the error, there are a few things you can try to fix it. First, try restarting your PS4. If that doesn’t work, try deleting the affected game data and redownloading it. If neither of those solutions work, you may need to contact Sony customer support for further assistance.
Section 6:
If you’re seeing the SU-41350-3 error code on your PS4, it means that the system software update file is corrupted and can’t be used. This can happen if the download was interrupted or if the file was corrupted during the download process.
There are a few things you can try to fix this error:
1. Check your internet connection and make sure it’s stable.
2. Delete the corrupted update file and try downloading the update again.
3. Try using a different internet connection to download the update.
4. If you’re still seeing the SU-41350-3 error, you can try reinstalling the system software. This will delete all of the data on your PS4, so make sure to back up your data before proceeding.
To reinstall the system software, you’ll need a USB flash drive with at least 1GB of free space. Format the USB drive as FAT32, and then create a folder named PS4. Inside the PS4 folder, create a folder named UPDATE. Download the PS4 system software from this link and save it in the UPDATE folder on your USB drive.
Once the download is finished, connect the USB drive to your PS4 and turn it on. The PS4 will automatically detect the update file and start the installation process. Follow the on-screen instructions to complete the installation.
Conclusion
There are a number of ways to fix the SU-41350-3 error on your PS4, but the most effective way is to simply delete the offending file and then re-download it from the PlayStation Store. This should clear up the error and allow you to continue using your PS4 without any issues.
